One Drive Two 3 Ply Flat Type Disposable Mask Machine / Non Woven Face Mask Making Machine
Automatic Face Mask Production Line Introduction:
This machine is mainly used for automatic forming of flat mask. Unwinding the whole roll of cloth, automatically folded and wrapped; unwinding the whole roll of rubber strip, cut to fixed length and then put into the wrapped cloth; both sides sealed by ultrasonic welding machine; then cut to form; send the mask to ear belt welding stations. Then collect the completed mask by laminating machine.
LA-2T1 can produce disposable masks with a size of 175 * 95mm or 175 * 90mm. The daily production capacity is 120000-150000PCS (24h).
Features:
1. High stability, low failure rate, beautiful appearance without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
4. The automatic mask making machine is automatic from material feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting, and material discharging.
6. The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and practicality.
8. Faster, Rotary connection device of Independent innovation design.
9. More stable, upgraded machine, touch screen, Taiwan photoelectric detection, stable performance, and low failure rate.
Technical parameters:
| Machine Size (mm) | (L)4500 ×(W)5500×(H)1830 |
| Voltage | AC 220V /50-60HZ |
| Packing speed ( PCS / min) | 80-100 |
| Power | 8.5KW |
Main electrical parts:
| Main machine configuration | Variable frequency motor | 1 set |
| Ultrasound | 2 sets |
| plc control | 1 set |
| electronic eyes | 2 sets |
| Ear strap machine configuration | Frequency conversion motor | 2 sets |
| Stepper motor | 4 sets |
| cylinder12 | 16 sets |
| Ultrasound | 4sets |
| Electronic Eye | 10sets |
| Conveying configuration | speed control motor | 2 sets |
Mask Forming Machine Introduction:
The LA-2T1 “one-to-two” full-automatic flat mask making machine production line adopts advanced design. It only needs to place the production of raw materials on the feeding rack. After the modulation is completed, the machine can realize automatic production. Only one person needs to operate the packaging, which fully realizes the entire automated production.
Ultrasonic welding, beautiful style, hygienic and environmental protection.
Operating environment: temperature 10-50 ℃, humidity 5-50%, non-flammable, corrosive gas.
Mask forming machine output:
The LA-2T1 face mask making Machine‘s output is 80-100 pieces per minute, the length of the bridge of the nose bridge is adjustable, and the product size error is ± 1mm.
According to demand, some molds can be replaced to realize a variety of mask sheets.
LA-2T1 can manufacture kinds of non-woven face mask: Cloth masks, gauze masks, activated carbon masks, double nose line masks, etc.
Supporting 1-4 layers of non-woven mask sheet production.
Mask forming machine technical parameters:
| Equipment size | Voltage | Productivity | Sub-power |
| 3345*630*1830mm | AC 220V；50-60Hz | 80-100Pcs/mins | 2.7KW |
Ear band welding machine introduction:
This equipment adopts an ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.
It is the last processing step of the production of ear band masks. Only one operator needs to place the mask body piece by piece in the mask plate.
To the finished product is completed automatically by the equipment.
This machine adopts servo, step drive, precise transmission, and adjustable speed.
This equipment adopts ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.
It is the last processing step of the production of earband masks. Only one operator needs to place the mask body piece by piece in the mask plate.
To the finished product is completed automatically by the equipment.
Earband welding machine technical parameters:
| equipment size | voltage | Productivity | Sub-power |
| 1915*855*1780mm | AC 220V；50-60Hz | 50-60 PCS/min | 2.7Kw |
Applicable Material:
| Item | Qty | Width(mm) | Outside dimension (mm) | Inner dimension(mm) | Weight(kg) |
| nonwoven cloth or melt blown cloth | 3 | 170~200 | Φ600 | Φ76.2 | 15 |
| rubber strip | 1 | 3-7 | Φ400 | Φ76.2 | 25 |
| ear belt | 4 | 160*3 | - | - | - |
Mask Specifications:
Standard: 175*90mm and 175*95mm (nonwoven cloth no more than 3 layer, subject to actual product).
Production Capacity:
Efficiency: 80-100PCS/min.
After-sales service:
| 1 | After the installation and commissioning of the equipment is completed, technical handover and operation and maintenance training for production personnel and equipment maintenance personnel are conducted, and the equipment can be operated and used only after qualified training. |
| 2 | The equipment maintenance period is 12 months from the date of equipment delivery. |
| 3 | Paid repairs and maintenance after the warranty period expires. |
| 4 | Response time for repair: 2 hours, repair time: 7 working days. |
| 5 | Problem resolution time: 48 hours (working day). |
Machine details:
Product Tags:
|
|
Disposable Face Mask Maker Machine 4500 × 5500× 1830 Customizable Color Images
|
